Bosch Rexroth ErgoSpin - Page 99

DEUTSCH
ENGLISH
ITALIANO
ESPAÑOL
SVENSKA
FRANÇAIS
ENGLISH
ENGLISH
3608870DD4/2015-09 | ErgoSpin/CC-ErgoSpin Bosch Rexroth AG 99 /110
Technical data
Tab.23: ESV...-G
Hand-held nut-
runner
ESV005-G ESV012-G ESV025-G ESV050-G ESV073-G ESV146-G
Order number 0 608 841
243
0 608 841
244
0 608 841
245
0 608 841
246
0 608 841
247
0 608 841
248
Working range
without output
drive [Nm]
1.0 - 5 2.4 - 12 5.0 - 25 10.0 - 50 14.6 - 73 29 - 146
Speed without
output drive [min
-
1
]
1090 1090 1700 830 900 420
Length (without
angle head) [mm]
333 333 365 375 406 430
Weight [kg] approx. 1.1 approx. 1.1 approx. 1.4 approx. 1.5 approx. 2.4 approx. 2.8
Integrated sensor
for angle compen-
sation
*)
YesYesYesYesYesYes
*)
From BS350 operating program version of 2.500, ErgoSpin handheld nutrunners with integrated
sensors feature an angle compensation function.
With the angle compensation function, users can compensate for the handheld nutrunner‘s
movement, allowing for the measurement and output of the tightening job‘s actual angle values.
Tab.24: ESM...-G
Hand-held nut-
runner
ESM012SD-
G
ESM012QD-
G
ESM025SD-
G
ESM025HT-
G
ESM035SD-
G
Order number 0 608 841
254
0 608 841
255
0 608 841
256
0 608 841
257
0 608 841
258
Length [mm] 190 201 223 223 223
Weight [kg] approx. 1.0 approx. 1.0 approx. 1.4 approx. 1.4 approx. 1.4
Speed [min
-1
] 1090 1090 1700 1700 1025
Working range
[Nm]
2.4 - 12 2.4 - 12 5.0 - 25 5.0 - 25 7.0 - 35
Tool mount 1/4'' square 1/4" quick-
change chuck
3/8'' square 3/8" square 3/8'' square
Integrated sensor
for angle compen-
sation
*)
Yes Yes Yes Yes Yes
*)
From BS350 operating program version of 2.500, ErgoSpin handheld nutrunners with integrated
sensors feature an angle compensation function.
With the angle compensation function, users can compensate for the handheld nutrunner‘s
movement, allowing for the measurement and output of the tightening job‘s actual angle values.