Bosch Rexroth HEDE 10-3 Series - Page 29

Commissioning 29/48
RE 30277-02-B/07.2016, HEDE 10-3X, Bosch Rexroth AG
• Locking / unlocking
The unit can be locked electronically to prevent unintentional
settings.
▶ Make sure that the unit is in
the normal operating mode.
▶ Press [▲] + [▼]
simultaneously for 10 s.
[Loc] is displayed.
10 s
During operation: [Loc] is briey displayed if you try to change
parameter values.
For unlocking:
▶ Press [▲] + [▼]
simultaneously for 10 s.
[uLoc] is displayed.
10 s
Factory setting: not locked
• Timeout:
If no button is pressed for 30 s during parameter setting, the unit returns
to the operating mode with unchanged values.
• Exiting a parameter without adopting the settings:
For unlocking:
▶ Press [▲] + [▼]
simultaneously.
Return to the menu level.