12.2 Identification
12.2.1 Scope of delivery
The total scope of a delivery is stated on the delivery note or shipping docu‐
ment. The scope of a delivery can be distributed over several packages.
Each individual package can be identified with the attached shipping label.
On receipt of the delivery, check that the goods delivered are in accordance
with your order and the shipping documents.
Immediately notify your responsible Rexroth sales partner of any deviations.
Directly notify the carrier in case of noticeable transport damage.
12.2.2 Type plate
Each motor has an individual type plate containing the device designation
and technical information. In addition, a second type plate is attached to the
motor delivered.
If the original type plate on the motor is covered by a machine contour, use
the second supplied type plate and attach it clearly visible on the machine.
This type plate is either attached loosely to the motor or glued to the original
type plate and can be removed.
The type plate is used for
● Identification of the motor
● Procurement of spare parts in case of malfunction
● Service information
The type designation of the motor is also stored in the encoder
data memory.
Bosch Rexroth AG DOK-MOTOR*-MSK*EXGIIK3-PR09-EN-P146/175
Synchronous Servomotors MSK For Potentially Explosive Areas
Delivery condition, identification, handling
To Next Page
Loading...
