14.6 Disassembly
Personal injury and material damage during
assembly works!
● Do not work on running or unsecured machines.
● Before starting work, secure the machine against unpredictable move‐
ments and against unauthorized operation.
● Before disconnecting the mechanical connections, secure the motor and
supply lines against falling.
Combustions via hot surface with tempera‐
tures over 60 ℃
Let the motor cool down, before maintenance. The thermal time constant sta‐
ted in the technical data is a measure for the cooling time. A cooling time up
to 140 minutes can be necessary!
Use safety gloves.
Do not work on hot surfaces.
● Follow the instructions in the machine documentation.
● Observe the safety instructions.
● Dismount the motor from the machine. Store the motor properly.
DOK-MOTOR*-MSK*EXGIIK3-PR09-EN-P Bosch Rexroth AG 163/175
Synchronous Servomotors MSK For Potentially Explosive Areas
Commissioning, operation and maintenance
To Next Page
Loading...
