13.3.3 Motor mounting
Mount the motor and pay attention:
1. Avoid clamping or jamming the centering collar on the motor side.
2. Avoid damaging the holder on the system side.
3. Connect the motor to the machine and observe the tightening torques.
4. Check strength and accuracy of connection before proceeding.
After proper mechanical assembly, carry out the electrical connection.
Bosch Rexroth AG DOK-MOTOR*-MSK*EXGIIK3-PR09-EN-P154/175
Synchronous Servomotors MSK For Potentially Explosive Areas
Installation
To Next Page
Loading...
