4.4 Acceptance test
Before initial start-up of the system or after changing a motor, do an accept‐
ance test. The acceptance report must confirm compliance with the instruc‐
tions and conditions of use given here. After repair and if safety-relevant
components have been serviced, the unit test of the motor must be carried
out again in accordance with EN 60079‑15 if the explosion protection proper‐
ties have been changed.
Bosch Rexroth AG DOK-MOTOR*-MSK*EXGIIK3-PR09-EN-P28/175
Synchronous Servomotors MSK For Potentially Explosive Areas
Explosion protection for MSK motors
To Next Page
Loading...
