RE 30110-B/11.2012, VT-VSPA2-1-2X/V0/T., Bosch Rexroth AG
3/40 Contents
Contents
1 About this documentation 5
1.1 Validity of the documentation 5
1.2 Required and amending documentation 5
1.3 Representation of information 5
1.3.1 Safety instructions 5
1.3.2 Symbols 6
1.3.3 Designations 6
1.3.4 Abbreviations 7
2 Safety instructions 7
2.1 General information on this chapter 7
2.2 Intended use 7
2.3 Improper use 7
2.4 Qualification of personnel 8
2.5 General safety instructions 8
2.6 Product-specific safety instructions 9
3 General information on damage to property and damage to the product 11
4 Scope of delivery 12
4.1 Recommended accessories 12
5 Information on this product 13
5.1 Performance description 13
5.2 Product description 13
5.2.1 Block diagrams/pin assignments of the amplifier card 14
5.2.2 Setting and display elements of the amplifier card VT-VSPA../T1 16
5.2.3 Setting and display elements of the amplifier card VT-VSPA../T5 17
5.2.4 Description of the functions and components of the analog amplifier card 18
5.2.5 Ramp on/off 20
5.2.6 Ramp time selection logic [19] (only for VT-VSPA2.../T5) 21
5.2.7 Characteristic curve generator [10] 21
5.2.8 Amplitude limiter [11] 22
5.2.9 Power output stage [16] 22
5.2.10 Clock generator [13] 22
5.2.11 Measuring sockets 22
6 Transport and storage 23
6.1 Storing the VT-VSPA2-1-2X 23
7 Installation 24
7.1 Work steps 24
7.2 Safety regulations 25
7.3 Installation conditions 25
7.4 Unpacking the amplifier card 26
7.5 Installing the amplifier card 26
8 Commissioning 28
8.1 Safety regulations 28
8.2 Setting the amplifier card 28