Bosch Rexroth VT-VSPA2-1-2X/V0/T5 User Manual

6/40 About this documentation
Bosch Rexroth AG, VT-VSPA2-1-2X/V0/T., RE 30110-B/11.2012
SIGNAL WORD
Type and source of danger!
Consequences in case of non-compliance
▶ Measures for the hazard avoidance
▶ <Enumeration>
• Warning sign: Draws attention to the danger
• Signal word: Identifies the degree of danger
• Type and source of danger: Specifies the type and source of danger
• Consequences: Describes the consequences in case of non-compliance
• Precaution: Specifies how the danger can be prevented
Table 2: Risk classes according to ANSI Z535.6-2006
Warning sign, signal word Meaning
DANGER
Indicates a dangerous situation which will cause death or
severe personal injuries if not avoided.
WARNING
Indicates a dangerous situation which may cause death or
severe personal injuries if not avoided.
CAUTION
Indicates a dangerous situation which may cause minor or
medium personal injuries if not avoided.
NOTICE
Damage to property: The product or the environment could
be damaged.
1.3.2 Symbols
The following symbols indicate notes which are not safety-relevant but increase the
comprehensibility of the documentation.
Table 3: Meaning of the symbols
Symbol Meaning
If this information is not observed, the product cannot be used and/or
operated optimally.
▶
Individual, independent action
1.
2.
3.
Numbered instruction:
The numbers indicate that the steps must be carried out one after
theother.
1.3.3 Designations
The following designations are used in this documentation:
Table 4: Designations
Designation Meaning
U
B
Operating voltage
VT-VSPA2 Analog amplifier card

Bosch Rexroth VT-VSPA2-1-2X/V0/T5 Specifications

General

Brand	Bosch
Model	Rexroth VT-VSPA2-1-2X/V0/T5
Category	Amplifier
Language	English