EasyManuals Logo

Bosch Rexroth VT-VSPA2-1-2X/V0/T5 User Manual

Bosch Rexroth VT-VSPA2-1-2X/V0/T5
65 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #49 background imageLoading...
Page #49 background image
36/40 Technical data
Bosch Rexroth AG, VT-VSPA2-1-2X/V0/T., RE 30110-B/11.2012
14 Technical data
In this connection, please refer to data sheet 30110 and the valid product-specificdocumentation.
For the valid data sheets, please refer to:
www.boschrexroth.com/medienverzeichnis
Information on the environment simulation testing for the areas EMC (electromag-
netic compatibility), climate and mechanical load see "environmental compatibility
statement" (RE 30110-U).
Table 11: Setting ranges
Denomination Potentiometer Setting range
Zero adjustment "Zw" ±30 %
Command values "w" to "w4" 0 to 110 %
Ramp times "t1" to "t5" (option T5)
"t" (option T1)
0.02 to 5 sec.; switchable 0.2 to 50 sec
Step level "S+" and "S–" 0 to 50 %
Amplitude attenuator "Gw+" and "Gw–" 0 to 110 % (applies to the step level setting
of 0 %)
Clock frequency "t" J5, J6 ≅ 4WRZ: f = 150 Hz...400 Hz
J5, J6 ≅ 4WRA10: f = 180 Hz...380 Hz ±15 %
J5, J6 ≅ 4WRA6: f = 240 Hz..0.350 Hz ±15 %
Table 12: Specification of the inputs
Denomination Value
Command values 1 - 4
(potentiometer inputs)
U
e
0 to ±10 V R
e
= 100 kΩ (M0 is reference)
Command value 5
(differential input)
U
e
0 to ±10 V R
e
= 50 kΩ
Command value 6 (current input) I
e
0 to 20 mA; R
B
= 100 kΩ
Ramp time external U
e
0 to ±10 V R
e
= 10 kΩ (internally increased to +15 V;
M0 is reference)
Command value call-ups U 8.5 V to U
B
→ call-up operated; R
e
> 100 kΩ
0 to 6.5 V → no call-up; R
e
> 100 kΩ
Ramp call-ups (option T5) U
U
8.5 V to U
B
→ call-up operated; R
e
> 100 kΩ
0 to 6.5 V → no call-up; R
e
> 100 kΩ
Quadrant recognition (option T1) U 8.5 V to U
B
→ ON; R
e
> 100 kΩ
0 to 6.5 V → OFF; R
e
> 100 kΩ
Command value inversion U 8.5 V to U
B
→ ON; R
e
> 100 kΩ
0 to 6.5 V → OFF; R
e
> 100 kΩ
Enable U 8.5 V to U
B
→ ON; R
e
> 100 kΩ
0 to 6.5 V → OFF; R
e
> 100 kΩ
Ramp on/off U 8.5 V to U
B
→ ON; R
e
> 100 kΩ
0 to 6.5 V → OFF; R
e
> 100 kΩ

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Bosch Rexroth VT-VSPA2-1-2X/V0/T5 and is the answer not in the manual?

Bosch Rexroth VT-VSPA2-1-2X/V0/T5 Specifications

General IconGeneral
BrandBosch
ModelRexroth VT-VSPA2-1-2X/V0/T5
CategoryAmplifier
LanguageEnglish

Related product manuals