General information on damage to property and damage to the product 11/40
RE 30110-B/11.2012, VT-VSPA2-1-2X/V0/T., Bosch Rexroth AG
3 General information on damage to prop-
erty and damage to the product
NOTICE
High voltage!
Possible damage to the analog amplifier card.
▶ Only wire the amplifier card in de-energized state.
High temperatures!
Possible damage to the amplifier card.
▶ Comply with the environmental conditions according to the data sheet.
▶ Do not use free-wheeling diodes in the solenoid conductors.
▶ Provide for sufficient air circulation.
Voltage loss or melting of the cable.
▶ For solenoid lines up to 50 m in length, use the cable type LIYCY 1.5mm².
Greater line lengths on request.
Overload!
Risk of overload and damage to the supply line in case of insufficient design and/or
operation with several electric devices.
▶ Provide for current limitation by means of overload protection.
▶ Dimension power supply unit and cable sufficiently.
Short-circuit!
Risk of overload and damage to the supply line in case of defects at the elec-
tricdevice.
▶ Provide for current limitation by means of overload protection.
Inadmissible temperature range!
Danger due to overheating. Device might be thermally destroyed.
▶ Comply with the specifications in the data sheet.
Electrostatic discharge!
Possible damage to the components of the analog amplifier card.
▶ Provide for equipotential bonding to discharge electrostatic charges from
yourbody.
▶ Work in a safe environment
▶ Do not use devices causing or having static discharges into the work environment.
▶ Do not work on the amplifier card in environments which might cause an elec-
trostatic charge.
▶ Handle the amplifier card with care. Do not touch exposed connection pins and
sensitive electronic components.
▶ Transport and store the amplifier card carefully in the original packaging intend-
ed for this purpose.
To Next Page
Loading...
Need help?
General