Bosch Rexroth VT-VSPA2-1-2X/V0/T5 User Manual

About this documentation 5/40
RE 30110-B/11.2012, VT-VSPA2-1-2X/V0/T., Bosch Rexroth AG
1 About this documentation
1.1 Validity of the documentation
This documentation applies to the following products:
• VT-VSPA2-1-2X/V0T1 mat. no.: 901002090
• VT-VSPA2-1-2X/V0T5 mat. no: 901002095
This documentation is intended for assembly fitters, operators, service engineers
and system end users.
This documentation contains important information on the safe and proper assem-
bly, transport, commissioning, operation, use, maintenance, disassembly and simple
troubleshooting of the product
▶ You should read this documentation thoroughly, and in particular chapter2
"Safety instructions" on page7 and chapter3 "General information on dam-
age to property and damage to the product" on page11, before working with
the product.
1.2 Required and amending documentation
▶ The product must not be commissioned until you have been provided with the
documentation marked with the book symbol
and you have understood and
observed it.
▶ Observe the configuration and setting instructions according to the 30110-Z ad-
ditional information when using the VT-VSPA2-1-2X amplifier card as replacement
for VT3000-3X, VT 3006-3X, VT 3013-3X, VT 3014-3X, VT 3017-3X, VT 3018-3X,
VT3026-3X, VT-VSPA2-1-1X/... or VT-VSPA2-50-1X/...
Table 1: Required and amending documentation
Title Document number Document type
Analog amplifier card 30110 Data sheet
Analog amplifier card 30110-U Environmental statement
Analog amplifier card 30110-Z Additional information
1.3 Representation of information
Consistent safety instructions, symbols, terms and abbreviations are used in this
documentation so that you can quickly and safely work with your product. For a bet-
ter understanding, they are explained in the following sections.
1.3.1 Safety instructions
In this documentation, safety instructions are indicated in chapter2.6 "Product-
specific safety instructions" on page9 and in chapter3 "General information on
damage to property and damage to the product" on page11 and whenever se-
quences of actions or instructions are explained which bear the danger of personal
injury or damage to property. The measures described for preventing these hazards
must be observed.
Safety instructions are set out as follows:

Bosch Rexroth VT-VSPA2-1-2X/V0/T5 Specifications

General

Brand	Bosch
Model	Rexroth VT-VSPA2-1-2X/V0/T5
Category	Amplifier
Language	English