72
6.3 Test functions
6.3.1 Air ventilator test
6.3.2 Valve test
The Test functions menu contains the following sub-menus:
– Air ventilator test (Chapter 6.3.1)
– Valve test (Chapter 6.3.2)
– Air heating test (Chapter 6.3.3)
– Gain test (Chapter 6.3.4) *
– Measurement chamber heating test (Chapter 6.3.5)
– Erase EEPROM (RTM parameter memory) (Chapter 6.3.6)
* The chapters marked with * are not relevant to servicing and are not described below!
The ventilators can be switched on or off in order to test the ventilator function.
The valve can be activated or deactivated in order to test the valve function. The valve can
be heard to switch.
To Next Page
Loading...
Need help?
General
