Troubleshooting de
disturbance Cause and troubleshooting
High spin speed
number is not
reached.
The unbalance control system compensates for unbalance
by reducing the spin speed.
▶
Redistribute the laundry in the drum.
Notice: Place large and small items of laundry
together in the drum. Laundry items of different sizes
are better distributed during spinning.
▶
Start the program Fling.
Spin program
does not start.
The drain pipe or water drainage hose is blocked.
▶
Clean the drain pipe and water drain hose.
The drain pipe or water drainage hose is kinked or
pinched.
▶
Make sure the drain pipe and water drain hose are
not kinked or pinched.
The unbalance control system has stopped spinning
due to uneven distribution of the laundry.
▶
Redistribute the laundry in the drum.
Notice: Place large and small items of laundry
together in the drum. Laundry items of different sizes
are better distributed during spinning.
▶
Start the program Fling.
Rustling, zi-
screeching sound.
Water is flushed into the detergent drawer under
pressure.
▶
Not a fault - normal operating noise.
Loud noises
end of skidding.
Device is not aligned correctly.
▶
Align the device
The feet of the device are not fixed.
▶
Fix the device feet. Align the device
Transport locks are not removed.
▶
Remove the transport locks
Rattling noises,
Rattling in the drain
pump.
Foreign matter has got into the drain pump.
▶
→
"Cleaning the drain pump ", page 40
Slurping, rhythmic
nice sucking noise.
The detergent solution pump is active, the detergent solution is
pumped out.
▶
Not a fault - normal operating noise.
49
To Next Page
Loading...
