Bosche WTS - Page 49

User manual WTS Ver.1.16
Seite 49 von 52
POSSIBLES COMMAND TO SEND TO THE COMMAND REGISTER (40006)
0
No command
1
6
7
SEMI-AUTOMATIC TARE enabling
(net display)
8
SEMI-AUTOMATIC ZERO
9
SEMI-AUTOMATIC TARE disabling
(gross display)
20
21
Keypad lock
22
Keypad and display unlock
23
Keypad and display lock
98
99
Save data in EEPROM
100
TARE WEIGHT ZERO SETTING
for calibration
101
Save first sample weight for
calibration
104
Real calibration cancellation
106
Add sample weight for calibration
130
Preset Tare enabling
131
COMMUNICATION EXAMPLES
The numerical data below are expressed in hexadecimal notation with prefix h.
EXAMPLE 1
Command for multiple writing of registers (hexadecimal command 16, h10):
Assuming that we wish to write the value 0 to the register 40017 and the value 2000 to the
register 40018, the string to generate must be:
h01 h10 h00 h10 h00 h02 h04 h00 h00 h07 hD0 hF1 h0F
The instrument will respond with the string:
h01 h10 h00 h10 h00 h02 h40 h0D
Query field name
hex
Response field name
hex
Instrument Address
h01
Instrument Address
h01
Function
h10
Function
h10
Address of the first register H
h00
Address of the first register H
h00
Address of the first register L
h10
Address of the first register L
h10
Number of registers to send H
h00
Number of registers H
h00
Number of registers to send L
h02
Number of registers L
h02
Byte Count
h04
CRC16 H
h40
Datum 1 H
h00
CRC16 L
h0D
Datum 1 L
h00
Datum 2 H
h07
Datum 2 L
hD0
CRC16 H
hF1
CRC16 L
h0F