User manual WTS Ver.1.16
Seite 24 von 52
9.7 SEMI-AUTOMATIC TARE (NET/GROSS)
THE SEMI-AUTOMATIC TARE OPERATION IS LOST UPON INSTRUMENT
POWER-OFF.
To perform a net operation (SEMI-AUTOMATIC TARE), close the NET/GROSS input or
press the key for less than 3 seconds. The instrument displays the net weight (just set
to zero) and the NET LED lights up.
To display the gross weight again, keep the NET/GROSS input closed or press for
3 seconds. This operation can be repeated many times by the operator to allow the loading
of several products.
Example of weighing fruit in a box:
Put the box on the scale, the display shows the box weight, press and the display
shows the net weight to zero; by introducing the fruit in the box, the display shows the fruit
weight. This operation can be repeated several times.
During the net weight displaying, keep pressed the key to temporarily
display the gross weight. As soon as the key is released, the net weight will be
displayed again.
The semi-automatic tare operation is not allowed if the gross weight is zero.
To Next Page
Loading...