3 Functionality
900-350_IFU_V2.6_10296-S13-20100111-EN ARC 300 / ARC 350 Operating manual 27
3.1.5. "GastroCUT" mode
If you wish to change the settings of the "GastroCUT" mode, see
Chapter Menu program 5a “GastroCut Mode”, page 60.
This mode consists of a pulse sequence of cutting current and
coagulation phase.
This mode is used for the removal of polyps or for making incisions in
papillae. The following applies:
• Blend 0 = low coagulation rate
• Blend 9 = high coagulation rate
There are likewise three modes available in the "GastroCUT" mode:
Mode Characteristics Application
"Slow" mode Cutting characteristics:
Slower pulse sequence
Recommended for particularly
intricate tasks
"Medium" mode
Cutting characteristics:
Dynamic
Recommended for skilled users
(default setting)
"Fast" mode Cutting characteristics:
Dynamic and fast pulse sequence
Recommended for experienced
users in this specialist area
Pos: 16 /679-BOWA/ARC 300/35 0/4 Funktionsweise/ 4.2 Bipolare Modi @ 4\ mod_1261040448835_6.doc @ 34653 @ 23
To Next Page
Loading...
