Bowa ARC 300 - Menu Program 7 Hide Fix Prog; Menu Program 8 Autostart Delay

6 Operation
900-350_IFU_V2.6_10296-S13-20100111-EN ARC 300 / ARC 350 Operating manual 61
6.4.9. Menu program 7 "Hide Fix Prog"
Standard programs that are not required are hidden in the menu
program "Hide Fix Prog".
1. Press the power limitation key for monopolar cutting 4.
2. Press the power limitation key for bipolar coagulation 31 to display
all standard programs.
ª
“All fixpgm active” appears on the main display 15.
3. Press the power limitation key for bipolar coagulation 30 to hide all
standard programs.
ª
“No fixpgm active” appears on the main display 15.
–or–
Press the key/display for AUTOSTART 32 to show/hide individual
standard programs.
4. Press program key 16/17 to browse the standard programs.
5. Press the power limitation key for monopolar coagulation 10 to hide
the standard program.
–or–
Press the power limitation key for monopolar coagulation 11 to
show the standard program.
6. Press the power limitation key for monopolar cutting 3 to return to
the menu programs.
6.4.10. Menu program 8 "Autostart Delay"
In the menu program “Autostart Delay”, the start-up delay period and
post-run time are changed in the AUTOSTART mode.
1. Press the power limitation key for monopolar cutting 4.
2. Press the power limitation key for monopolar coagulation 10/11 to
adjust the start-up delay in 50 ms increments
(from 50-2500 ms).
3. Press the power limitation key for bipolar coagulation 30/31 to
adjust the post-run time in 100 ms increments (from 0-2500 ms).
4. Press the power limitation key for monopolar cutting 3 to return to
the menu programs.