6 Operation
62 ARC 300 / ARC 350 Operating manual 900-350_IFU_V2.6_10296-S13-20100111-EN
6.4.11. Menu program 9 "Edit Prog Names"
In the menu program “Edit Prog Names”, freely available programs are
edited with an individual text in the display/main display.
X Press the power limitation key for monopolar cutting 4.
Editing text in the display/main display
1. Press the program key 16/17 to select the program to be edited.
2. Press the key/display 12 for moderate coagulation.
3. Press the key for scabbing level 25 or 26 to select a letter or
character.
4. Press the power limitation key for monopolar coagulation 10/11 to
toggle between upper and lower case.
5. Press the power limitation key for monopolar cutting 4 to select the
next letter or character.
6. Press the power limitation key for monopolar cutting 3 to delete the
last letter or character.
7. Press the key/display for AUTOSTART 32 to save entered names.
8. Press the power limitation key for monopolar cutting 3 to return to
the menu programs.
Deleting the text in the display/main display
All HF parameters of the deleted programs will likewise be deleted.
1. Press the power limitation key for bipolar coagulation 30 and the
key/display for AUTOSTART 32 to delete the entire text entry for
the selected program.
2. Press the power limitation key for bipolar coagulation 31 and the
key/display for AUTOSTART 32 to delete all entries in the freely
selectable HF programs (24-99).
3. Press the power limitation key for monopolar cutting 3 to return to
the menu programs.
To Next Page
Loading...
