Bowa ARC 300 - Detailed Program Descriptions

6 Operation
900-350_IFU_V2.6_10296-S13-20100111-EN ARC 300 / ARC 350 Operating manual 43
6.3. Program descriptions
The following recommended settings for standard programs are based
on empirical values and must be verified in each individual case by the
surgeon.
6.3.1. Program 0 "Standard"
This program is used for monopolar/bipolar cutting and coagulation in
standard applications.
6.3.2. Program 1 “EndoLAP Bipolar Cut”
(Bipolar Cut only for ARC 350 and ARC 350L)
This program is used for bipolar cutting with preconfigured settings.
;
The key/display for “Monopolar output 2” 39 and “Bipolar output 4”
48 are preconfigured.
X Connect the instrument(s) to the HF device.