Bowa ARC 300 - Menu Programs; Overview

6 Operation
900-350_IFU_V2.6_10296-S13-20100111-EN ARC 300 / ARC 350 Operating manual 57
6.4. Menu programs
The menu programs are standard programs which define basic
parameters, such as the operating language, sound, display and
memory options, for the main programs.
6.4.1. Overview
The following menu programs are available:
• Menu program 1 "Set Language"
• Menu program 2 "Sound Level"
• Menu program 3 "Moderate Coag Mode"
• Menu program 4 "BipCoag Mode"
• Menu program 5 "Forced Coag Mode"
• Menu program 5a "GastroCut Mode"
• Menu program 6 "Show Prev Inf-No"
• Menu program 7 "Hide Fix Prog"
• Menu program 8 "Autostart Delay"
• Menu program 9 "Edit Prog Names"
• Menu program 10 "Restore Programs"
• Menu program 11 "Panel Check"
Selecting a menu program
1. Simultaneously press the on/off switch 33 and the program
selection switch 17 to access the overview of the menu programs.
ª
The current software version is displayed on the display/main
display 15.
2. Press the menu selection switch 16 to select the menu program.
Exiting a menu program
X Press the power limitation key for monopolar cutting 3 to return to
the overview of the menu programs.
When the HF device is switched off, the new settings will be saved
automatically.