69
Serialization
Add Serialization
BMP
®
51 User’s Manual
For multiple serialization:
7. Complete Steps 1 through 6 above.
8. On the Editing screen, navigate to the next sequence location (cursor position) on the
label.
Note: If creating a compound serialization to display at the same cursor position
on the label, complete Steps 1-5 above, then proceed immediately to Step 10 below.
9. Press Serial .
The previous serialization values display in the dialog box presented.
10. Navigate to the Add Seq 2 option box and press Enter .
A second set of sequence value fields is presented.
11. In the Sequence #2 Start Value field, enter the start value for that sequence.
12. In the Sequence #2 End Value field, enter the end value for that sequence.
13. In the Sequence #2 Increment field, enter the increment for that sequence.
To Next Page
Loading...
