Brady IP Printer series User Manual

Brady IP Series Printer
Replacing assembly units
Edition 12/07 Service Manual 11
The outer casing can be removed complete with the cover.
1. Open the cover (4), remove the media hub and material.
2. Unscrew 2 screws (1) from the front of the casing.
3. Unscrew 2 screws (2) from the inside of the bottom.
4. Remove the outer casing (3) together with the cover (4) and place it beside the printer.
5. Remount the print mechanism (5) (see section 2.6, item 4) and hinge it up.
6. Open the ferrite (7) and pull out the two cables (6) of the casing from the BDC PCB (8).
Mount the outer casing and cover in the reverse order. Hinge the printhead assembly up to make it easier
to insert the parts.

Brady IP Printer series Specifications

General

Brand	Brady
Model	IP Printer series
Category	Printer
Language	English