Page 10 - Programming Manual 24805480/14-11-2012 319F92C ver. 1.2 -The data and information in this manual may be changed at any time with no obligation on BRAHMS’s part to notify anyone of this.
ENGLISH
2.5 Keypads
KEYPADS 05
*
CHANGE KEYPAD 01
KEYPAD 01
AREAS. ASSOC. 01
###
Associated areas: (Default:
###
)
S
A
The associated areas are those manageable and displayed by the key panel. These
also represent an AND-type filter on the areas managed by the code or by the scenario.
Example: An apartment with a ground floor shop in common. The owner wishes to manage the store
and apartment under the same code, with the opportunity to manage the store from home.
Area 1 = HOME
Area 2 = SHOP
Scenario 1 = CLOSE HOME (
SWITCH ON SELECT. AREAS
;
areas=
#-
)
Scenario 2 = OPEN HOME (
SWITCH OFF SELECT.AREAS
; areas=
#-
)
Scenario 3 = CLOSE SHOP (
SWITCH ON SELECT. AREAS
; areas=
-#
)
Key pad 1 = Home location: (areas associated =
##
; scenario A =
LOCK HOME
; scenario B
=
OPEN HOME
; scenario C =
CLOSE SHOP
)
Key pad 2 = Store location: (areas associated =
-#
; scenario A =
CLOSE SHOP
)
Cod 1 = Business Owner (associated areas =
##
)
Cod 2 = Employee (associated areas =
-#
)
*
SCENARIOS 01
*=CHANGE LIST
Scenarios: (Default:
A=sc.1; B=sc.2, C=sc.3, 4=sc.4 ...
)
S
A
Associates the scenarios to the keys on the keypad.
Use the arrow keys to select the keypad key (A, B, C, 4, 5, ...)
With
+
–
keys modify the scenario associated to the keypad button.
Example: a home with three area management (day, night, perimetric) through two activations:
total, only perimetric.
Area 1 = DAY TIME
Area 2 = NIGHT TIME
Area 3 = PERIMETER
Scenario 1 = GOING OUT (
TURN ON+OFF.EXACT
; zones =
###
)
Scenario 2 = STAYING IN (
TURN ON+OFF.EXACT
; zones =
--#
)
Key pad 1 = areas associated =
###
; scenario A =
GOING OUT
;
SCENARIO B=
STAYING INDOORS
)
SCENARIO A
GOING OUT
*
TAMPER 01
NO
Tamper: (Default:
NO
)
S
A
Enables/disables the key pad tamper and warning of failed communication with
control unit (from the keyboard 2 to 5).
ENTRY BUZZER 01
YES
Input buzzer : (Default:
YES
)
S
A
For activating / deactivating the buzzer during the entrance time.
EXIT BUZZER 01
YES
Output buzzer : (Default:
YES
)
S
A
For activating / deactivating the buzzer during the exit time.
ALARM BUZZER 01
YES
Alarm buzzer: (Default:
YES
)
S
A
For activating / deactivating the buzzer during the control unit’s alarm time.
DESCRIPTION 01
KEYPAD 01
Keypad description:
S
A
For editing the keypad description.
*
To Next Page
Loading...
Need help?
General