Page 20 - Programming Manual 24805480/14-11-2012 319F92C ver. 1.2 -The data and information in this manual may be changed at any time with no obligation on BRAHMS’s part to notify anyone of this.
ENGLISH
2.10 Telephone notifications
TELEPHONE 14
NOTICES
*
PHONE NOT.MENU 01
GENERAL ALARM
ACT.SYS. ALRM.
########
*
REST.SYS. ALRM.
--------
ACT.AREA ALR 01
--------
REST.AREA ALR 01
--------
Activating and restoring general alarm in single areas:
A
Telephone notifications associated to both activation and restoration of the single
area’s general alarm.
Use
+
–
to select the areas. Use the
+
-
keys to set the phone numbers.
ACT. SYS.SABOTG.
########
Activating the system sabotage alarm (generic notification):
F
S
A
Restore system sabotage alarm (generic notification):
S
A
Telephone notifications associated to both activation and restoration of the system’s
sabotage mode.
Use the
+
-
keys to set the phone numbers.
*
REST.SYS.SABOTG.
--------
PHONE NOT MENU 02
SABOTAGE
ACT.SAB.CNT-BUS
--------
Activating and restoring sabotage alarm in control unit and peripherals:
A
Telephone notification associated to the activation and restoration of the control unit’s
and peripherals’ sabotage alarm (tampering) and (module tampers), no peripherals
communication, ...).
Use the
+
-
keys to set the phone numbers.
REST.SAB.CNT-BUS
--------
ACT.AREA SAB. 01
--------
Activating and restoring sabotage alarm in single areas:
A
Telephone notifications associated to both activation and restoration of the single
area’s sabotage alarm (the alarm is given by the inputs associated to the areas).
Use
+
–
to select the areas. Use the
+
-
keys to set the phone numbers.
REST.AREA SAB. 01
--------
ACT. INP.SAB. 001
--------
REST.INP.SAB. 001
----
----
Activating and restoring sabotage alarm for single inputs:
A
Telephone notifications associated to the activation and restoration of the single
inputs’ sabotage alarm (24 hour tamper and inputs).
Use
+
–
to select the inputs. Use the
+
-
keys to set the phone numbers.
ACT. SYS-TECH.ALR
########
Activating the system technical alarm (generic notification):
F
S
A
Restore system technical alarm (generic notification):
S
A
Telephone notification associated to the activation and restoration of the system’s
technical alarm (the alarm is given by the technical inputs).
Use the
+
-
keys to set the phone numbers.
*
RST. SYS-TECH.ALR
--------
PHONE NOT MENU 03
TECHNICAL ALARM
ACT.AREA T-AL. 01
--------
Activating and restoring technical alarm in single areas:
A
Telephone notifications associated to the activation and restoration of the single areas’
technical alarm (the alarm is given by the technical inputs associated to the areas.
Use
+
–
to select the areas. Use the
+
-
keys to set the phone numbers.
RST.AREA T-AL. 01
--------
Activating and restoring general system alarm (generic warning):
F
S
A
Telephone notifications associated to both activation and restoration of the general
alarm of the system.
Use the
+
-
keys to set the phone numbers.
PHONE NOT MENU 02
To Next Page
Loading...