Page 21 - Programming Manual 24805480/14-11-2012 319F92C ver. 1.2 -The data and information in this manual may be changed at any time with no obligation on BRAHMS’s part to notify anyone of this.
ENGLISH
PHONE NOT.MENU 04
BURGLARY ALARM
ACT.SYS BUR-ALRM
########
Activating the system burglary alarm (generic notification):
F
S
A
Reset burglary alarm system (general warning):
S
A
Telephone notifications associated to the activation and restoration of the system’s
burglary alarm (the alarm is given by the burglar-proof alarm inputs).
Use the
+
-
keys to set the phone numbers.
*
RST.SYS BUR-ALRM
--------
ACT.
AREA B-AL.01
--------
RST.AREA B-AL.01
--------
Activating and restoring single area burglary alarms:
A
Telephone notifications associated to the activation and restoration of the single areas’
burglary alarm (the alarm is given by the burglar-proof alarm inputs associated to the areas.
Use
+
–
to select the areas. Use the
+
-
keys to set the phone numbers.
ACT.SYS.FAILURE
-------#
Activating system breakdown (generic notification):
F
S
A
Restore system breakdown (generic notification):
S
A
Telephone notifications associated to both activation and restoration of system breakdowns.
Use the
+
-
keys to set the phone numbers.
*
RST.
SYS.FAILURE
--------
PHONE NOT.MENU 06
FAILURES
ACT.BAT.FAILURE
----
----
Activating and restoring battery breakdown:
A
Telephone notifications associated to both activation and restoration of battery
breakdowns (control unit).
Use the
+
-
keys to set the phone numbers.
RST.BAT.FAILURE
----
----
PHONE NOT.MENU 05
TRN ON./TRN OFF
TOTAL SYSTEM ON
----
----
Total switching on, switching off and partialisation of the system:
F
S
A
Telephone notifications associated to complete switching on, complete switching
off and partialisation of the system (total power on means total switching on of the
managed areas).
Use the
+
-
keys to set the phone numbers.
*
TOTAL SYSTEM OFF
--------
AREA ARM 01
--------
AREA DISARM. 01
--------
Switching on and off single areas:
A
Telephone notifications associated to the switching on and off of the single areas.
Use
+
–
to select the areas. Use the
+
-
keys to set the phone numbers.
SYSTEM PARTIAL.
----
----
ACT.NTWK230 FAIL
----
----
Activating and restoring 230 Vac power supply breakdown:
A
Telephone notifications associated to the absence and restoration of the 230 Vac power
supply in the control unit.
Use the
+
-
keys to set the phone numbers.
RST.NTWK230 FAIL
----
----
ACT.PWR-SRC FAIL
----
----
Activating and restoring power supply unit breakdown:
A
Telephone notifications associated to both activation and restoration of breakdowns of
the control unit power supply.
Use the
+
-
keys to set the phone numbers.
RST.PWR-SRC FAIL
----
----
ACT.FUSE FAILURE
----
----
Activating and restoring breakdown of fuses:
A
Telephone notifications associated to both activation and restoration of breakdowns of
fuses in the control unit and peripherals.
Use the
+
-
keys to set the phone numbers.
RST.FUSE FAILURE
----
----
ACT PSTN-GSM FLR
----
----
Activating and restoring PSTN and GSM breakdown:
A
Telephone notifications associated to the activation and restoration breakdowns of the
PSTN and GSM lines (PSTN line down, unsuccessful SIM log on, etc.).
Use the
+
-
keys to set the phone numbers.
RST PSTN-GSM
FLR
----
----
To Next Page
Loading...