Page 28 - Programming Manual 24805480/14-11-2012 319F92C ver. 1.2 -The data and information in this manual may be changed at any time with no obligation on BRAHMS’s part to notify anyone of this.
ENGLISH
Call sequence:
(Default:
1-2-3-4
)
S
A
For choosing if in the selection sequence of programmed telephone numbers, in case of
communications that are NOT completed (e.g. the called telephone number is busy), another
call should be immediately made to the same telephone number or if the communicator
should continue selecting other numbers.
CONTINUE 1-2-3-4
Call and move on to next number.
RETRY 1-1-2-2
Call and try calling back for the number of times set up in the phone.
2.15 Telephone options
TELEPHONE 20
OPTIONS
*
CALL SEQUENCE
CONTINUE 1-2-3-4
Stop telephone calls sequence:
(Default:
ALL PHONE CALLS
)
S
A
ALL PHONE CALLS
While listening to a voice call, Users can press
key 5 on their
telephones to automatically interrupt ALL of the subsequent
telephone communications ( SMSs, voice calls, CONTACT-IDs).
OWN ONLY
While listening to a voice call, Users can press key 5 on their phones
to automatically interrupt ONLY the repetitive call backs to their own
phone numbers. ALL of the subsequent telephone communications
are anyhow carried out (SMSs, voice messages, CONTACT-IDs).
STOP FROM PHONE
ALL PHONE CALLS
Stop sequence of code / key insertion calls:
S
A
(Default:
NONE
)
ALL PHONE CALLS
If an event (i.e. general, technical, sabotage alarm, etc.)
sets off
a cycle of telephone calls, it can be interrupted by entering either
a code or key, on the keypad, associated to the areas of
competence with area switching off properties.
NONE
Events such as, general, technical or sabotage alarms and so on,
trigger a cycle of phone calls, this CANNOT be interrupted once it
has started by neither codes nor keys which are associated to
areas of competence having area switch-off properties.
STOP FROM CODE
NONE
Priority telephone calls.
(Default:
PSTN
)
F
S
A
The priority allows to select the type of predefined network between the PSTN or GSM lines
for voice calls. In case the combiner does not find the predefined network, all voice calls
will be rerouted to the secondary network. SMS messages are always sent on the GSM line.
Digital calls are carried out only on the PSTN line.
PSTN
Voice calls via PSTN telephone line
GSM
Voice calls via GSM.
LINE PRIORITY
PSTN
Activate SMS telecontrol:
(Default:
YES
)
A
For activating SMS-based telecontrol.
SMS RMT-CTRL
YES
Activate PSTN (voice guide) telecontrol:
(Default:
YES
)
A
For activating access to the voice-guide via PSTN line.
Skip answer service:
(Default:
YES
)
A
Activated if PSTN TELECONT is set to YES; for accessing the voice guide
even when there is
a programmed answering service to answer before the combiner.
If set to YES, you call the home number and hang up at the first ring; repeat the call in the
next 60"
Rings from PSTN:
(Default:
05
)
A
Activated if PSTN TELECONT is set to YES; for set the number of rings
after which the
combiner will respond.
Example 1: a house without answering machine and we want combiner answer after 6 rings.
Telephone options: Telecontrol from PSTN
YES
; Skip answer service
NO
; Rings from PSTN:
06
.
Example 2: we have a home that has an answering machine that switches on after 5 rings.
Telephone options: Telecontrol from PSTN
YES
; Skip answer service
YES
.
PSTN RMT-CTRL
YES
SKIP ANSWER SERV.
YES
PSTN RINGS
[1..15] 05
To Next Page
Loading...
Need help?
General