Page 5 - Programming Manual 24805480/14-11-2012 319F92C ver. 1.2 -The data and information in this manual may be changed at any time with no obligation on BRAHMS’s part to notify anyone of this.
ENGLISH
2.2 Installation
The system menu is for defining the system components (areas, keypads, inserters, ...), which are employed to perform a series of
tests. For programming move to the subsequent menu items.
SYSTEM 02
*
EDIT SYSTEM
CHANGE
SYSTEM
MANAGED AREAS
###-
Managed areas: (Default:
###-
)
F
S
A
Use the
+
-
keys to enable the areas managed in the system. The system is
totally inserted when all of the selected areas are switched on.
Example: if you only have three areas (day zone, night zone and perimetral zone) set
###-
.
0..4
*
KEYPADS
#----
Keypads: (Default:
#----
)
F
S
A
Use the
+
-
keys to enable the keypads used.
Example: if you want to use 4 keypads on the system, set
####
.
0..4
INSERTERS
----
MITHO TOUCH
YES
Inserters (Default:
----
)
F
S
A
Use the
+
-
keys to activate the inserters being used.
Example: if on the system you want to use 2 inserters
set
##--
.
0..4
REMOTE KEYPAD ADDRESSING
Automatic self-learning and addressing of keypads:
F
S
A
For learning the system’s keypads.
SYSTEM 02
*
ADDRESSING
KEYPADS
*
SELF-LEARNED
KEYPADS
SELF-LEARNED
KEYPADS
SELF-LEARNED
KEYPADS
Keypads already self-learned:
F
S
A
If the keyboards are already self learned a confirmation text is displayed.
Touch Mitho: (Default:
YES
)
F
S
A
With
+
-
cursors it’s possible to enable/disable the communication with the
BPT home automation system.
NOTE.The communication between Brahms and BPT home automation system it
available if the Proxinet has a firmware 1.0.16B4 or higher.
To Next Page
Loading...
Need help?
General