Page 26 - Programming Manual 24805480/14-11-2012 319F92C ver. 1.2 -The data and information in this manual may be changed at any time with no obligation on BRAHMS’s part to notify anyone of this.
ENGLISH
2.13 Keys
KEYS 17
*
*
CHECK KEY
*
KEY 001
KEY 001
STATUS 001
ENABLED
Clear code: (Default:
ENABLED
)
F
S
A
If you want to use a key it must be activated.
*
AREAS. ASSOC. 001
###
Areas associated to the keys: (Default:
###
)
S
A
For assigning the key’s areas of competence.
Use the
+
-
keys to set the areas to associate.
AUTHORIZAT. 001
SWITCH-ON + OFF
Authorise key:
(Default:
SWITCH ON + OFF
)
A
SWITCH ON + OFF
The key is activated to switch on and off the areas
associated to it.
ONLY TURN ON
The key is authorised only to switch on the areas
associated to it.
Example: for assigning a switch on key to the cleaning crew.
SELECT KEY
LEARN KEY 001
*=OK #=ESC
Key learning:
F
S
A
For key-learning and associating.
*
OUTPUT ASSOC.001
NO
Associating output:
(Default:
NO
)
A
For associating an impulsive-type output when key is inserted
into inserter.
Example: for opening a lock with key.
DESCRIPTION 001
KEY 001
GROUP 001
00
Key description:
F
S
A
For editing the key description.
Group:
F
S
A
For associating a key to a group.
*
*
Check key:
F
S
A
For checking whether a key is inserted in the database and if the index and description are
viewable.
To Next Page
Loading...
Need help?
General