EasyManua.ls Logo

Brainlab CURVE - UPS Troubleshooting

Brainlab CURVE
90 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3.4 Troubleshooting: UPS
3.4.1 UPS Audio Signals
Signals
Occurrence Possible Cause
UPS occasionally emits a beep, but the
system is operating normally.
UPS is briefly transferring the system to its alternate
power source due to power problems (typically volt-
age burnouts, surges or spikes).
This operation is normal as it protects the system from
abnormal utility voltages.
UPS emits a long beep followed by
short beeps, then the system shuts
down.
The UPS battery is completely empty. Fully charge the
UPS before using the system again.
Troubleshooting: UPS
40 Technical User Guide Rev. 1.1 Curve Dual Navigation Station Ver. 1.2

Table of Contents

Other manuals for Brainlab CURVE

Related product manuals