BRANNSTROM BilgMon488 - Technical Specifications; General Specifications

BilgMon488 Instruction Manual vAD 6(38)
BRANNSTROM SWEDEN AB
www.brannstrom.se
7 SPECIFICATION
7.1 GENERAL
Measurement:
Oil range:
0 – 30 ppm
Resolution:
0.1 ppm
Accuracy:
According to IMO MEPC.107(49)
Response time:
< 5 sec
Alarms:
Alarm 1 (automatic stopping device) delay:
0-10 sec user adjustable
Alarm 2 (annunciation) delay:
0-60 sec user adjustable
1
Alarm points 1 and 2:
1-15 ppm user adjustable
Alarm hysteresis:
0.5 ppm (below alarm point)
Data storage and retrieval:
Calibration storage:
Stored in sensor housing.
IMO required data:
Stored in BilgMon488 main housing (sensor
housing may be replaced with data remaining on
board).
Data retrieval via display.
Optional data retrieval:
Via USB port.
User interface:
LCD display:
2x16 alphanumeric display
Control:
4 button keypad
Environment:
Ambient temperature range:
According to IMO MEPC.107(49), (0-55°C)
Enclosure ingress protection rating:
IP65
Installation:
Sample line inlet operating range:
Recommended: 1-2 bar (200 – 300 l/h)
Maximum: 3 bar
Sample temperature:
Maximum: 50 °C
1
0-600 sec on master unit software versions before C9, shown on certificate and in “Info” menu.