BRANNSTROM BilgMon488 - 115;230 V AC Model Specifications; 24 V AC;DC Model Specifications

BilgMon488 Instruction Manual vAD 7(38)
BRANNSTROM SWEDEN AB
www.brannstrom.se
7.2 SPECIFIC 115/230 V AC MODEL
Input/Output:
Current output:
0 – 20 mA or 4 – 20 mA for 0 – 30 ppm
Communications:
USB serial communication (separate cable and
software)
Alarm outputs:
2 x relays (0.25A)
Clean water solenoid valve output:
1 x relay (0.5A, supply voltage)
Switch input:
1 x switch input for separator status
System and supply:
Supply:
1 A, 115 or 230 V AC, 50 – 60 Hz
Power consumption electronics:
10 VA
Power consumption solenoid:
18 VA
7.3 SPECIFIC 24 V AC/DC MODEL
Input/Output:
Current output:
0 – 20 mA or 4 – 20 mA for 0 – 30 ppm
Communications:
USB serial communication (separate cable and
software)
Alarm outputs:
2 x relays (1A)
Clean water solenoid valve output:
1 x relay (1A, supply voltage)
Switch input:
1 x switch input for separator status
System and supply:
Supply:
1.5 A, 24 V AC (50 – 60 Hz) or 24 V DC
Power consumption electronics:
10 VA
Power consumption solenoid:
18 VA