• • •
127
CHANGING OIL
1. Tractor should be positioned on level ground to ensure
correct oil levels when lling.
2. Remove drain plugs (A), (B) and (C). When draining
the wheel hubs, rotate the wheels so the drain hole (B) is
in the 6 o’clock position, drain oil.
3. Rotate the wheels so oil level ll mark is parallel to the
gound.
4. Install drain plug (A), (B) and (C).
PERIODIC MAINTENANCE & ADJUSTMENT
8050 OPERATORS MANUAL (122011).indd 127 1/10/2012 9:36:52 PM
To Next Page
Loading...
