Branson 8050 - Electrical Cables

• • •
138
5. ELECTRICAL CABLES
• Before starting to work everyday, check if
any cable is in contact with other parts, or if
any insulation is peeled off or damaged, or
any contact is loosened.
• Before and after work, remove any straw or
dust on the battery or cables.
[Otherwise]
There is a risk of re due to short circuit.
Open the hood of the engine and check if any
cable is in contact with other parts, or if any
insulation is peeled off or damaged, or any
contact is loosened.
Damaged cables must be repaired by an au-
thorized dealer. Arrange for periodic mainte-
nance for cables every 50 hours or once a
year even thought the cables are not dam-
aged.
DANGER
PERIODIC MAINTENANCE & ADJUSTMENT
8050 OPERATORS MANUAL (122011).indd 138 1/10/2012 9:36:54 PM