• • •
99
2. TO STOP THE ENGINE
a) Put the acceleration lever on LOW, and turn the main
switch to “OFF”.
b) Put shuttle lever, main gearshift lever and PTO shift
lever to “N”. Put PTO clutch switch in to the “OFF” posi-
tion and front wheel lever to the “OFF”.
c) Put the position control lever on “DOWN”.
• When stopping the engine, never stop it
with the reducer lever.
• After stopping the engine, make sure to
apply the parking brake.
WARNING
(Note) for warming-up operation, strongly step on the
brake pedal and pull your parking brake.
When leaving the tractor, park the tractor in a
at and safe place, put the shuttle lever and
the main shift lever to “N”, and block the tires.
[Otherwise]
The tractor may move and cause an acci-
dent. ALWAYS SET THE PARKING BRAKE
WARNING
OPERATIONS & WORK
8050 OPERATORS MANUAL (122011).indd 99 1/10/2012 9:36:46 PM
To Next Page
Loading...
