EasyManua.ls Logo

Branson 8050 - Pre-Operation Checks and Break-in

Branson 8050
163 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
• • •
89
CHECKING BEFORE OPERATION
Do not provide illumination with a lit cigarette
or a lighter when fueling.
Never ll the fuel tank while the engine is run-
ning or hot.
After lling the fuel tank, close the fuel ller
cap completely and wipe off the excess fuel
thoroughly.
If the fuel hoses are damaged, fuel will leak.
Make sure that you check for any leakage.
DANGER
Perform the maintenance on a at and safe
location that will keep the tractor in place and
will not cause a risk to people passing by.
Before carrying out the maintenance, place
blocks at the front tires to prevent movement.
[Otherwise]
An unexpected accident may occur, such as over-
turning of the tractor.
When going under the implement, fully close
the slow/stop valve.
[Otherwise]
There is a risk of injury due to implement falling.
If the fuel hoses are damaged, fuel will leak.
Make sure that you check for any leakage.
WARNING
Stop the engine during checking, mainte-
nance, or repair
Carry out the maintenance work after heated
area such as the mufer or the engine have
fully cooled down.
[Otherwise]
There is risk of burn.
After detaching the covers for checking or
maintenance, make sure to put them back in
their place
[Otherwise]
There is a risk that you may get entangled in the
tractor
or get injured.
If the fuel hoses are damaged, fuel will leak.
Make sure that you check for any leakage.
CAUTION
OPERATIONS & WORK
8050 OPERATORS MANUAL (122011).indd 89 1/10/2012 9:36:42 PM

Table of Contents

Related product manuals