• • •
82
1. DIFFERENTIAL LOCK PEDAL
It is used to transmit the same power to both rear wheels
and serves to prevent slipping when one of the rear
wheels is idling.
2. WORK LAMP SWITCH
Pull the lever up while depressing the brake pedal fully to
engage the parking brake. To release the parking brake,
step on the brake pedal and push the lever down.
•Connect both brake pedals with the connector.
Release the differential gear lock when mak-
ing a turn. Otherwise, the tractor may not turn
in the direction you want and cause an ac-
cident.
WARNING
FUNCTIONS
8050 OPERATORS MANUAL (122011).indd 82 1/10/2012 9:36:41 PM
To Next Page
Loading...
