• • •
97
1. TO START THE ENGINE
a) Check fuel.
Check if there is enough fuel by observing fuel gauge.
b) F/R shuttle lever into “Neutral” position.
c) Put the position control lever into the “lowest” position
and PTO switch turn to OFF position.
Don’t crank engine unless position control le-
ver is in the lowest position.
[Otherwise]
Implement might rise quickly and there is a
risk of injury or machinery breakdown
WARNING
Check the safety around the tractor and start
to move slowly. .
[Otherwise]
There is a risk of injury.
WARNING
OPERATIONS & WORK
8050 OPERATORS MANUAL (122011).indd 97 1/10/2012 9:36:45 PM
To Next Page
Loading...
