EasyManua.ls Logo

Branson 8050 - Engine Performance and Warning Lamp Issues

Branson 8050
163 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
• • •
152
Situation Inspection item Solution
The engine revolution is ir-
regular.
Is the air mixed in the fuel system? Drain the water and replace the fuel.
Is the injection nozzle clogged? Have the injection nozzle repaired or re-
placed
Is the fuel lter clogged? Have the fuel lter washed or replaced.
The engine is over heated Is the coolant level low? Rell the coolant.
Is the fan belt slack or damaged? Adjust or replace the fan belt.
Is the radiator core clogged? Clean the radiator core.
Is the engine oil level low? Rell the engine oil.
Is the engine running under too much load? Reduce the load.
The engine power is too
weak.
Is the air cleaner clogged? Inspect the air cleaner
Is the nozzle stained with carbon? Contact the dealer for repair
Is the compression force weak?
Is the valve clearance adjusted properly?
Is the injection timing bad?
TROUBLESHOOTING
8050 OPERATORS MANUAL (122011).indd 152 1/10/2012 9:36:56 PM

Table of Contents

Related product manuals