100-214-239 Rev. A 2-9
System Features
Digital Sonifier
2.3 System Features
The Digital Sonifier includes the following features:
• Front-panel system On/Off switch
• Separate front-panel Stop and Pause buttons for experiment cycles
• Power output of up to 200 watts (Model 250) and up to 400 watts (Model 450)
• Nominal 117 Volt (North American) and 200-245 Volt (export) models available (factory
set)
• Multiple languages for display messages: English, Spanish, Italian, German or French.
• Front-panel LCD display, showing parameter settings, alarms and messages
• Membrane front panel with numeric keypad for parameter entry and function selection
• Digital parameter setting, with valid parameter range checking
• Twenty (20) presets for different parameter Setups
• Digital Wattmeter
• Front panel Bargraph display of relative power while running
• Amplitude control, analog, adjustable while running
• Pulse or Continuous operation
• Temperature option
• Sample Hold using Pulse/Pause operation
• Digital Timer (9 hours, 59 minutes, 59 seconds)
• Automatic end-of-cycle using Limits
• Factory-tuned 20 kHz ultrasonic design, requires no user adjustment
• Parallel Printer interface
• Printed Report capability, with date stamp and parameter information
• Serial interface (for remote computer or terminal)
• User I/O, offers remote start/stop control
For additional feature information, please contact your Branson representative.
To Next Page
Loading...
