Why can't I display weight in my desired unit on Brecknell Scales?
This issue occurs when the desired unit is not enabled, or d?5oz when the unit is lb:oz. To resolve this, enable the unit in CONFG-UNITS.
What does 'PWT.ER' mean on Brecknell 6702U?
The 'PWT.ER' error means the piece weight is too small (less than 0.5d), indicating that the weight on the platform is insufficient to define a valid reference weight. Use a greater weight for the sample.
What does 'PCT.ER' mean on my Brecknell Scales?
The 'PCT.ER' error means the unit-percentage weight is too small. Specifically, the weight of 1%, 0.1%, or 0.01% (determined by CONFG-FUNC-PERCNT) is less than 0.5d. To resolve this, use more weight for the sample.
What does 'STB.ER' mean on Brecknell 6702U?
The 'STB.ER' error indicates that USER-HOLD-STB.TIM is too short, USER-HOLD-HLD.RG is too small, or there is another failure. Try setting USER-HOLD-STB.TIM longer or setting USER-HOLD-HLD.RG bigger.
Explains manual structure, text conventions, and special messages.
Covers operational warnings, routine maintenance, and cleaning procedures.
Details power supply, USB, and RS-232 serial port connections.
Instructions for column and base mounting of the scale display.
Overview of the main circuit board, connectors, and jumpers.
Lists available models, sizes, and outlines for the 67XXU series.
Technical specs for power, operating environment, and certifications.
Explains the front panel layout, keys, and basic operational modes.
Guide to entering, navigating, and configuring setup menu parameters.
Step-by-step guide to entering the scale's calibration mode.
Instructions for performing zero point and linearity calibration.
Adjusting scale for location and inputting calibration parameters.
Adjusting displayed weight without standard calibration weights.
Configuration of serial communication, ports, protocols, and command sets.
Lists commands and their corresponding responses for scale communication.
Procedures for physical sealing and audit trail parameters for trade compliance.
Explains display elements, error messages, and troubleshooting steps.
General| Display | LCD |
|---|---|
| Auto Power Off | Yes |
| Tare Function | Yes |
| Overload Indication | Yes |
| Low Battery Indication | Yes |
| Division | 0.1g |
| Readability | 0.1g |
| Power Supply | AC adapter |
| Units | g, oz |
To Next Page