- 31 -
2.4 GHz: Select Auto (20MHz or 40MHz) for best performance in a network using
Wireless-B, Wireless-G and Wireless-N (2.4 GHz) devices. Select 40MHz only for a
channel width of 40 MHz and select 20MHz only for a channel width of 20 MHz.
Wide Channel
5 GHz: Select 40MHz only or Auto (20MHz or 40MHz) to have this setting be available
for the primary Wireless-N (5GHz) channel. Select Auto if unsure about which channel
to select.
2.4 GHz: Select 40MHz only or Auto (20MHz or 40MHz) to have this setting be
available for the primary Wireless-N (2.4GHz) channel. Select Auto if unsure about
which channel to select.
Standard Channel
5 GHz: Select the channel for Wireless-A and Wireless-N (5GHz) networking. If 40MHz
only or Auto (20MHz or 40MHz) for Channel Width is selected, then the Standard
Channel will be a secondary channel for Wireless-N (5GHz). Select Auto if unsure
about which channel to select.
2.4 GHz: Select the channel for Wireless-B, Wireless-G, and Wireless-N (2.4GHz)
networking. If 40MHz only or Auto (20MHz or 40MHz) is selected for Channel Width,
then the Standard Channel will be a secondary channel for Wireless-N (2.4GHz).
Select Auto if unsure about which channel to select.
SSID Broadcast: Hide the network name (SSID) so people who are not on the network
cannot see it in their list of available networks.
AP Isolation: This isolates all wireless clients and wireless devices on the network from each
other. Wireless devices will be able to communicate with the router but not with each other.
To Next Page
Loading...