2.
47
Pre-Scanning to crop a portion you want to scan using the scanner glass 2
The Preview button is used to preview an image for cropping any unwanted portions from the image. When
you are satisfied with the preview, click the Next button from the scanner window to scan the image.
a Put the document face down on the scanner glass.
b Select the Picture type (A).
c Make sure you select Flatbed in the Paper source pull-down box (B)
Note
If your machine has no ADF, you can skip step c.
d In the Scan dialog box, click the Preview (C) button. The entire document will be scanned into the PC
and will appear in the scanning area.
A
B
C
Scanning
area
To Next Page
Loading...
