Driver and Software
63
2
Advanced print settings
When you click the triangle mark (c) beside Advanced, the advanced print settings appear.
Ink Save Mode
You can conserve ink use with this feature. When you set InkSaveMode to On, printed items appear
lighter. The default setting is Off.
You cannot change the InkSaveMode setting if you set Slow Drying Paper to on.
Density Adjustment
Increases or decreases the print density.
You cannot change the Density Adjustment setting if you set Slow Drying Paper to on.
When you choose Duplex or Booklet and increase print density, print speed will decrease accordingly.
Sleep Time
When the machine does not receive data for a certain period of time, it enters sleep mode. In sleep mode,
the machine acts as though it were turned off. When you choose Printer Default, the timeout setting will
be reset to the specific time set at the machine; this can be altered in the driver. If you want to change the
Sleep Time, choose Manual and then enter the time in the text box on the driver.
While the machine is in Sleep Mode, the LCD shows Sleep, but the machine can still receive data.
Receiving a print job will automatically wake up the machine to start printing.
To Next Page
Loading...
