General Information
80
3
1
When optional lower trays are installed.
2
When the optional output tray is installed.
Tray3 Size
1
Any* / Letter / Legal / A4 /
Executive / JIS B5 / A5 / Folio
Chooses the size of paper you loaded in this optional
lower tray.
Tray4 Size
1
Any* / Letter / Legal / A4 /
Executive / JIS B5 / A5 / Folio
Chooses the size of paper you loaded in this optional
lower tray.
General Setup
Submenu Menu Selections Options Descriptions
Local Language - English* / Français... Changes the LCD language for your
country.
Density - -6 / ... / -1 / 0* / 1 / ... / 6 Increases or Decreases the print
density.
Increasing the print density will darken
the printed image. When you choose
Duplex or Booklet and increase print
density, print speed will decrease
accordingly.
Ecology Sleep Time 0 / 1 / 2 / 3* / 4 / 5 / ... Min Sets the time to return to Power Save
mode.
Ink Save On / Off* Increases the page yield of the ink
cartridge.
Beeper - Low / Med / High / Off* Adjusts the beeper volume.
Panel Control Button Repeat 0.1Sec* / 0.4Sec /
0.6Sec / 0.8Sec /
1.0Sec / 1.4Sec /
1.8Sec / 2.0Sec
Sets the time for the LCD message to
change when holding a or b at intervals.
Message Scroll
Level1* / Level2 / ... /
Level10
Sets the time in seconds that an LCD
message will scroll across the LCD.
From Level 1=0.2 sec to Level
10=2.0 sec.
LCD Contrast -nnonn+ Adjusts the contrast of the LCD.
Auto Online On* / Off Sets the machine to automatically
return to Ready mode.
Stopper LED - On* / Off Chooses whether the output paper
stopper lights according to the machine
status. This item is available when the
stopper is set at its default Letter/A4
position.
The factory settings are shown in Bold with an asterisk.
Paper Tray (continued)
Submenu Options Descriptions
The factory settings are shown in Bold with an asterisk.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
