EasyManuals Logo

Brother MFC-240C User Manual

Brother MFC-240C
149 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #103 background imageLoading...
Page #103 background image
88
Error messages B
As with any sophisticated office product, errors may occur. If this happens, your machine identifies
the error and shows an error message. The most common error messages are shown below.
You can correct most errors by yourself. If you need more help, the Brother Solutions Center offers
latest FAQs and troubleshooting tips.
Visit us at http://solutions.brother.com
.
Error Message Cause Action
Change Unable
XX
The machine has a mechanical
problem.
—OR—
A foreign objects such as a clip or
ripped paper is in the machine.
Open the scanner cover and remove any foreign
objects inside the machine. If the error message
continues, see Transferring your faxes or Fax
Journal report on page 91 before disconnecting
the machine so you will not lose any important
messages. Then, disconnect the machine from
the power for several minutes and then
reconnect it.
Clean Unable
XX
The machine has a mechanical
problem.
—OR—
A foreign objects such as a clip or
ripped paper is in the machine.
Open the scanner cover and remove any foreign
objects inside the machine. If the error message
continues, see Transferring your faxes or Fax
Journal report on page 91 before disconnecting
the machine so you will not lose any important
messages. Then, disconnect the machine from
the power for several minutes and then
reconnect it.
Comm.Error Poor phone line quality caused a
communication error.
Send the fax again or connect the machine to
another telephone line. If the problem continues,
call the telephone company and ask them to
check your phone line.
Cover is Open The scanner cover is not closed
completely.
Lift the scanner cover and then close it again.
Data
Remaining
Print data is left in the machine's
memory.
Re-start printing from your computer.
Print data is left in the machine's
memory. The USB cable was
unplugged while the computer was
sending the data to the machine.
Press Stop/Exit. The machine will cancel the job
and clear it from the memory. Try to print again.
Disconnected The other person or other person's
fax machine stopped the call.
Try to send or receive again.
Document Jam The document was not inserted or
fed properly, or the document
scanned from the ADF was too
long.
See Using the ADF on page 8.
See Document jam on page 91.
DR Mode in Use The machine is set to Distinctive
Ring mode. You cannot change the
Receive Mode from Manual to
another mode.
Set Distinctive Ring to off. (See Turning off
Distinctive Ring on page 36.)

Table of Contents

Other manuals for Brother MFC-240C

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-240C and is the answer not in the manual?

Brother MFC-240C Specifications

General IconGeneral
Package weight10700 g
PictBridgeYes
Scan speed4 sec/page
Scan file formatsBMP, JPG, PDF, PNG, TIFF
Dimensions (WxDxH)398 x 370 x 180 mm
All-in-one functionsFax, Scan
Color all-in-one functionscopy, fax, print, scan
Compatible operating systemsWindows 98SE/Me/2000/XP/2003/Vista Mac OS Linux
FaxingColor faxing
Fax memory170 pages
Modem speed14.4 Kbit/s
Fax coding methodsJPEG, MH, MMR (Fax coding method), MR
Fax speed dialing (max numbers)40
Copier resize25 - 400 %
Maximum copy resolution1200 x 1200 DPI
Maximum number of copies99 copies
Copy speed (black, normal quality, A4)18 cpm
Copy speed (color, normal quality, A4)16 cpm
Compatible memory cardsCF, MMC, MS Pro, SD, xD
Scanner typeFlatbed scanner
Grayscale levels256
Maximum scan area216 x 297 mm
Maximum scan resolution19200 x 19200 DPI
Optical scanning resolution600 x 2400 DPI
Bundled softwarePhotocapture Centre Brother MFL-Pro Suite Brother ControlCentre3 ScanSoft Paperport SE + OCR Brother ControlCentre 2 (Mac) NewSoft Presto! PageManager 7 (Mac)
Standard interfacesUSB 2.0
DisplayLCD
Market positioningHome & office
Total input capacity100 sheets
Total output capacity50 sheets
Auto document feeder (ADF) input capacity10 sheets
Digital senderNo
Number of print cartridges4
Print technologyInkjet
Maximum resolution6000 x 1200 DPI
Print speed (black, normal quality, A4/US Letter)25 ppm
Print speed (color, normal quality, A4/US Letter)20 ppm
Maximum print size210 x 297 mm
Paper tray media typesGlossy paper, Photo paper, Plain paper, Transparencies
Non-ISO print media sizesExecutive (184 x 267mm), index card, Letter (media size)
ISO A-series sizes (A0...A9)A4, A5, A6
Maximum ISO A-series paper sizeA4

Related product manuals