EasyManuals Logo

Brother MFC-240C User Manual

Brother MFC-240C
149 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #53 background imageLoading...
Page #53 background image
Chapter 7
38
Connecting an external
TAD (telephone
answering device)
7
You may choose to connect an external
answering device. However, when you have
an external TAD on the same telephone line
as the machine, the TAD answers all calls
and the machine ‘listens’ for fax calling (CNG)
tones. If it hears them, the machine takes
over the call and receives the fax. If it does
not hear CNG tones, the machine lets the
TAD continue playing your outgoing message
so your caller can leave you a voice
message.
The TAD must answer within four rings (the
recommended setting is two rings). The
machine cannot hear CNG tones until the
TAD has answered the call, and with four
rings there are only 8 to 10 seconds of CNG
tones left for the fax ‘handshake’. Make sure
you carefully follow the instructions in this
guide for recording your outgoing message.
We do not recommend using the toll saver
feature on your external answering machine if
it exceeds five rings.
Note
If you do not receive all your faxes, reduce
the Ring Delay setting on your external
TAD.
If You Subscribe to your Telephone
company's Distinctive Ring Service:
You may connect an external TAD to a
separate wall jack only if you subscribe to
your telephone company's Distinctive
Ring service, have registered the
distinctive ring pattern on your machine,
and use that number as a fax number. The
recommended setting is at least four rings
on the external TAD when you have the
telephone company's Distinctive Ring
Service. You cannot use the Toll Saver
setting.
If You Do Not Subscribe to Distinctive
Ring Service:
You must plug your TAD into the EXT.
jack of your machine. If your TAD is
plugged into a wall jack, both your
machine and the TAD will try to control the
phone line. (See illustration below.)
1TAD
When the TAD answers a call, the LCD
shows Telephone.
Connections 7
The external TAD must be plugged into the
jack labeled EXT. Your machine cannot work
properly if you plug the TAD into a wall jack
(unless you are using Distinctive Ring).
a Plug the telephone line cord from the
telephone wall jack into the jack labeled
LINE.
b Plug the telephone line cord from the
external TAD into the jack labeled EXT.
(Make sure this cord is connected to the
TAD at the TAD's telephone line jack,
and not its handset jack.)
c Set your external TAD to four rings or
less. (The machine's Ring Delay setting
does not apply.)
d Record the outgoing message on your
external TAD.
1
1

Table of Contents

Other manuals for Brother MFC-240C

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-240C and is the answer not in the manual?

Brother MFC-240C Specifications

General IconGeneral
Package weight10700 g
PictBridgeYes
Scan speed4 sec/page
Scan file formatsBMP, JPG, PDF, PNG, TIFF
Dimensions (WxDxH)398 x 370 x 180 mm
All-in-one functionsFax, Scan
Color all-in-one functionscopy, fax, print, scan
Compatible operating systemsWindows 98SE/Me/2000/XP/2003/Vista Mac OS Linux
FaxingColor faxing
Fax memory170 pages
Modem speed14.4 Kbit/s
Fax coding methodsJPEG, MH, MMR (Fax coding method), MR
Fax speed dialing (max numbers)40
Copier resize25 - 400 %
Maximum copy resolution1200 x 1200 DPI
Maximum number of copies99 copies
Copy speed (black, normal quality, A4)18 cpm
Copy speed (color, normal quality, A4)16 cpm
Compatible memory cardsCF, MMC, MS Pro, SD, xD
Scanner typeFlatbed scanner
Grayscale levels256
Maximum scan area216 x 297 mm
Maximum scan resolution19200 x 19200 DPI
Optical scanning resolution600 x 2400 DPI
Bundled softwarePhotocapture Centre Brother MFL-Pro Suite Brother ControlCentre3 ScanSoft Paperport SE + OCR Brother ControlCentre 2 (Mac) NewSoft Presto! PageManager 7 (Mac)
Standard interfacesUSB 2.0
DisplayLCD
Market positioningHome & office
Total input capacity100 sheets
Total output capacity50 sheets
Auto document feeder (ADF) input capacity10 sheets
Digital senderNo
Number of print cartridges4
Print technologyInkjet
Maximum resolution6000 x 1200 DPI
Print speed (black, normal quality, A4/US Letter)25 ppm
Print speed (color, normal quality, A4/US Letter)20 ppm
Maximum print size210 x 297 mm
Paper tray media typesGlossy paper, Photo paper, Plain paper, Transparencies
Non-ISO print media sizesExecutive (184 x 267mm), index card, Letter (media size)
ISO A-series sizes (A0...A9)A4, A5, A6
Maximum ISO A-series paper sizeA4

Related product manuals