Brother MFC-820CW - Page 140

124
LAN TCP/IP(Wired) BOOT Method Auto*
Static
RARP
BOOTP
DHCP
Chooses the BOOT method
that best suits your needs.
See
Network
User's
Guide
on the
CD-
ROM
IP Address [000-255].
[000-255].
[000-255].
[000-255]
Enter the IP address.
Subnet Mask [000-255].
[000-255].
[000-255].
[000-255]
Enter the Subnet mask.
Gateway [000-255].
[000-255].
[000-255].
[000-255]
Enter the Gateway
address.
Node Name BRN_XXXXXX Enter the Node name.
WINS Config Auto*
Static
Chooses the WINS
configuration mode.
WINS Server (Primary)
000.000.000.000
(Secondary)
000.000.000.000
Specifies the IP address of
the primary or secondary
server.
DNS Server (Primary)
000.000.000.000
(Secondary)
000.000.000.000
Specifies the IP address of
the primary or secondary
server.
APIPA On*
Off
Automatically allocates the
IP address from the link-
local address range.
TCP/IP(WLAN) BOOT Method Auto*
Static
RARP
BOOTP
DHCP
Chooses the BOOT method
that best suits your needs.
IP Address [000-255].
[000-255].
[000-255].
[000-255]
Enter the IP address.
Level1 Level2 Level3 Options Descriptions Page
The factory settings are shown in Bold with an asterisk.