Brother MFC-8810DW Service Manual

5-10
Confidential
Refer to the separate manual for details of worker switches.
<Operation Procedure>
(1) Press the [1] and [0] buttons in this order in the initial state of maintenance mode.
"WSW00" is displayed on the LCD.
(2) Enter the worker switch number that you want to change the setting.
The display shown below appears on the LCD.
(3) Press the [ ] or [ ] button to move the cursor to the desired selector, and change the
setting by pressing the [1] or [0] button.
(4) When changing the setting is completed, press the [OK] button. The new selector setting
value is stored in the EEPROM, and the LCD returns to the ready state for worker switch
number entry ([WSW00]).
(5) When worker switch setting is completed, press the [Stop/Exit] button to return the
machine to the initial state of maintenance mode.
WSW79 Function setting 27
WSW80 Copy speed adjustment
WSW81 Emulation function deletion
WSW82 AirPrint icon type setting
Note:
• To cancel operation and return to the initial state of maintenance mode, press the
[Stop/Exit] button.
• If there is no entry for one minute or longer on 2-digits firmware switch number
selection, the machine returns to the initial state of maintenance mode automatically.
WSW No. Function
WSWXX = 0 0 0 0 0 0 0 0
Selector No. 1 Selector No. 8

Brother MFC-8810DW Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Resolution	Up to 1200 x 1200 dpi
Automatic Duplex Printing	Yes
ADF Capacity	50 sheets
Monthly Duty Cycle	Up to 50, 000 pages
Memory	128 MB
Fax Speed	33.6 kbps
Processor	400 MHz
Connectivity	USB, Ethernet, Wi-Fi Direct
Scanning Resolution	Up to 19200 x 19200 dpi (Interpolated)
Mobile Printing	Brother iPrint&Scan, AirPrint, Google Cloud Print
Maximum Paper Size	Legal (8.5" x 14")
Print Speed	Up to 40 ppm