Brother MFC-8810DW Service Manual

5-46
Confidential
2. OTHER SERVICE FUNCTIONS
2.1 Change ON/OFF Setting for Deep Sleep Mode
This function allows you to change the Deep Sleep mode setting to ON or OFF.
<Operation Procedure>
Non touch panel models
(1) While the machine is in the ready state,
press the [Menu] button. Then press the
[ ] or [ ] button to select "General
Setup", and press the [OK] button.
(2) Press the [ ] or [ ] button to select
"Ecology", and press the [OK] button.
(3) Press the [ ] or [ ] button to select
"Sleep Time", and press the [OK]
button.
(4) While "**Min" is displayed, press the
[Start] and [Secure Print] buttons
simultaneously.
(5) Press the [ ] or [ ] button to change
the setting to On or Off, and press the
[OK] button.
(6) The new setting is saved, and the LCD
returns to the Sleep Time display.
Touch panel models
(1) While the machine is in the ready state,
press the [Menu] button, and press
"General Setup" on the LCD.
(2) Press "Ecology" on the LCD.
(3) Press "Sleep Time" on the LCD.
(4) Press the [Start] and [*] buttons
simultaneously. "Deep Sleep/On/Off" is
displayed on the LCD.
(5) Press [On] or [Off] on the LCD.
(6) The new setting is saved, and the LCD
returns to the Sleep Time display.

Brother MFC-8810DW Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Resolution	Up to 1200 x 1200 dpi
Automatic Duplex Printing	Yes
ADF Capacity	50 sheets
Monthly Duty Cycle	Up to 50, 000 pages
Memory	128 MB
Fax Speed	33.6 kbps
Processor	400 MHz
Connectivity	USB, Ethernet, Wi-Fi Direct
Scanning Resolution	Up to 19200 x 19200 dpi (Interpolated)
Mobile Printing	Brother iPrint&Scan, AirPrint, Google Cloud Print
Maximum Paper Size	Legal (8.5" x 14")
Print Speed	Up to 40 ppm