Brother MFC-9330CDW Advanced User's Guide

Receiving a fax
37
4
Setting the Fax Receive
Stamp 4
You can set the machine to print the received
date and time at the top center of each
received fax page.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display Fax.
d Press Fax.
e Swipe up or down, or press a or b to
display Setup Receive.
f Press Setup Receive.
g Swipe up or down, or press a or b to
display Fax Rx Stamp.
h Press Fax Rx Stamp.
i Press On (or Off).
j Press .
NOTE
• Make sure you have set the current date
and time on the machine (see
Quick Setup Guide).
• If you downloaded Internet Fax:
The received time and date will not appear
when using Internet Fax.
Receiving a fax at the end of a
conversation 4
At the end of a conversation you can ask the
other party to send you a fax before you both
hang up. Make sure the ADF is empty.
a Ask the other party to place the
document in their machine and to press
the Start or Send key.
b When you hear the CNG tones (slowly
repeating beeps), press Fax Start.
NOTE
• If the Touchscreen is dark for Sleep mode,
touch it to display Fax Start.
• If the machine is in Automatic Redial, wait
until it is finished and try again.
c Press Receive to receive a fax.
d Replace the external handset.

Brother MFC-9330CDW Specifications

Print Specifications

print speed black	up to 23 ppm
print speed color	up to 23 ppm
print resolution	up to 600 x 2400 dpi

Copy Specifications

copy speed black	up to 23 cpm
copy speed color	up to 23 cpm
copy resolution	600 x 600 dpi

Scan Specifications

scan resolution optical	1200 x 2400 dpi
scan resolution interpolated	19200 x 19200 dpi
document glass size	8.5” x 11.7”

Fax Specifications

fax modem speed	33.6k bps
fax page memory	up to 500 pages
speed dial locations	200

Paper Handling

auto document feeder capacity	up to 35 pages
paper size maximum	up to 8.5” x 14” (legal)
standard paper capacity	250 sheets

Power and Energy

deep sleep mode power consumption	<2W
automatic duplex printing	Yes
energy star qualified	Yes